SY-FPKH01 Fire Fighter's Helmet consists of a helmet shell, mask, shawl, cushion and other parts, half-helmet design, fashionable, with anti-sharp impact, anti-corrosion, heat radiation, reflective, insulation, light, etc. Performance, helmet and breathable respirator and wireless communication system, there are obvious reflective signs.
The fire fighter helmet applies to the protection of head and face from burn, cut, shock, hit, or scratch during firefighting emergency or disaster rescue, traffic accident, vehicle extraction rescue etc.
（1）Anti-collision, especially to overhead crash impact protection performance. From the shell to the head of the wearer a total of high-strength shell, high-density foam, cushioning wide crosshead and cap hoop Ⅰ and force buffer network and hoop Ⅱ a total of four damping structure to minimize impact strength and the skull Local shock.
（2）Excellent high temperature performance, due to the use of reinforced polyamide fiber shell, and by the fire-retardant treatment, the cap ring plastic shell material on the overall shape of the support, the screen with high temperature PC composite materials, shawls with protective clothing fabric plus Heat radiation coating, double structure, so its excellent high temperature performance.
（3）More comprehensive protection, increase the protection of the ears, the brain, the head fixed to the cap ring state, the skull all parts of the helmet shell space remain at 3cm above, and in the cap ring to increase comfort elastic cushion Layer, to ensure that accidental impact will not cause any part of the skull directly force.
（4）Inside and outside the multi-level adjustment, combined with the wearer's head close, reasonable weight, stable center of gravity, cap ring tightness adjustment by the outer helix body external knob control can be without the helmet in the case of any Regulate and adapt to all kinds of Chinese head.
（5）Comfortable to wear, due to head uniform network, multi-level adjustment cap, cap ring and jaw with skin contact parts are made of soft high-quality light sheepskin material, sweat breathable, comfortable fit, and mandibular with flame retardant Non-woven belt, soft, quick-drying, will not cause skin irritation after prolonged hot and humid conditions.
Shell＜1KG, total weight＜1.3KG
Maximum Impact Force
Heat Resistant Performance
Shell does not touch head
Deformation Sagging of Back Edge of Shell
3.2mm( GA44-2004 Standard: ≤40mm)
Deformation Sagging of Peak
2.4mm(GA44-2004 Standard: ≤30mm)
Deformation Sagging of Two Sides of Shell
4.6mm(GA44-2004 Standard: ≤30mm)
7.8mm(GA44-2004 Standard: ≤20mm)
Maximum deformation of shell is 38.2mm(GA44-2004 Standard: ≤40mm)
After Uninstall Deformation
6.2mm(GA44-2004 Standard: ≤15mm)
Insulating Property: Leakage Current of the Shell
1.5mA(GA44-2004 Standard: ≤3mA)