SY-FPB101 Fire Fighter's Boots, made of flame retardant rubber, anti-skid, anti-shock, puncture resistant, fireproof, waterproof, oil proof, anti smashing and puncture proof, steel plate bottom, protection. Inside the foot of disinfection canvas lining, lined with sponge at the end, the above products are in line with national standards, and supporting the use of fire service.
（1）Fire Fighting;
（2）Emergency Rescue
Fire fighting boots mainly by the outsole and boots to help two parts, the theme color is black, accompanied by the yellow Wai, along the lines. The whole boots are multi-layer structure.
（1）Boots with steel head, to improve sunscreen performance. Inside and outside the steel head adhesive layer, sponge comfort layer, cotton cloth lining, etc.,
Both insulation and make it comfortable to wear.
（2）Outsole with steel midsole to improve anti-piercing performance. In the steel bottom of the upper and lower sides of the rubber insulation, insulation paper, foam 沬 comfortable layer and cotton cloth lining, outsole prominent non-slip.
（3）From the boot to the bottom of the mouth, the sponge layer is added between the rubber layer and the lining layer of the cotton cloth, which has good insulation, flame retardancy and heat insulation and at the same time can effectively improve the wearing comfort.
（4）Boots on the right side of the product logo printed on the right, contains the manufacturer, the main function, the use of standards and other information.
Item | Configuration | |
Part of Boots | Upper Surface | Outer Bottom |
Breaking Strength | ≥14.7MPa | ≥10.78MPa |
Elongation at break | ≥480% | ≥380% |
Permanent deformation at break | ≤40% | / |
Abrasion Loss | / | ≤0.8 |
Strength | 55-65° | 55-70° |
Brittleness Temperature | ≤-40℃ | ≤-40℃ |
Air Aging | 100℃*24H | 100℃*24H |
Breaking Strength Decreased | ≤35% | ≤35% |
Flame Retardant Property | FV-1 | FV-1 |
Adhesion Strength of surface & Fabric | 0.78N/mm | / |
Thickness of vamp | ＞1.5mm | / |
